關于東晟
工程盾構機械密封件
來源：廣東東晟密封科技有限公司 - www.vipcar1010.com更新時間：2018-03-19
|
產品應用篇Product application |
工程盾構行業Shield Machine Industry |
|
盾構機根據工作原理一般分為手掘式盾構、擠壓式盾構、半機械式盾構、機械式盾構。盾構機鉸 接裝置處的密封尤為重要。東晟密封的工程盾構機械密封件：近幾年在廣東、福建、湖南、江西等的國 家高鐵、地鐵施工配套中廣泛用，并做出了重大貢獻！
According to the working principle, the shield machine is generally divided into hand-drilled shield, squeezed shield, semi-mechanical shield, and mechanical shield. The seal at the hinged device of the shield machine is especially important. DSH Seals Engineering Shield Mechanical Seals: In recent years, it has been widely used in high-speed rail and subway construction facilities in Guangdong, Fujian, Hunan, Jiangxi, etc., and made significant ontributions. |
|
   |
|
 |
品名(TYPE)：活塞密封 |
|
溫度(TEMP.RANGE)：-50~+150℃ |
|
|
速度(SPEED)：- |
|
|
壓力(PRESSURE)：- |
|
| 材質(MATERICAL)：EPDM | |
|
應用(Application):盾構機鉸接裝置的密封。 Seals of the hinged device in the shield machine. |
|
工程盾構機械密封件廠 - 工程盾構機械密封件,盾構密封件,機械密封件,密封件,隧道掘進機密封件
 |
品名(TYPE)：V型夾布油封 |
|
溫度(TEMP.RANGE)：-25℃~+200℃ |
|
|
速度(SPEED)：≤0.5m/s |
|
|
壓力(PRESSURE)：≤40MPa |
|
| 材質(MATERICAL)：FKM夾布 | |
|
應用(Application):挖冶金設備Steel hydraulic 陶瓷設備Ceramic machine 重載油缸Heavy duty cylinders 油壓機Presses。 |
|
工程盾構機械密封件廠 - 工程盾構機械密封件,盾構密封件,機械密封件,密封件,隧道掘進機密封件
 |
品名(TYPE)：防塵圈 |
|
溫度(TEMP.RANGE)：-45℃~+100℃ |
|
|
速度(SPEED)：≤1m/s |
|
|
壓力(PRESSURE)：- |
|
| 材質(MATERICAL)：PU | |
|
應用(Application):廣泛應用于礦物液壓油、硅油、HFA/HFB型阻燃液，某些牌號適用于高溫達50℃的熱水中。Widely used in mineral hydraulic oil, silicone oil, HFA, HFB flame retardant, some grades are suitable for hot water up to 50℃. |
|
工程盾構機密封圈3136mmx3200mmx32.6mm
盾構機密封圈1786mmx1850mmx32.6mm
工程盾構機械密封件廠 - 工程盾構機械密封件,盾構密封件,機械密封件,密封件,隧道掘進
